Hettich CADRO, Technical Information

Page: 25 / 47

24 | 25
F2
F1
1
1
3
3
2
2
4
4
10
4 11
1
9 mm
18 mm
max.
20 mm
1
1
2
2 3
8 mm
max. 5 mm
max
50 KG
Accessories.
Connecting thread and adjustable stand.
1
Cut the profile to the required length.
2
The connecting thread is inserted into the profile‘s end up to the
flush end.
3
Thanks to the integrated M8 nut in the connecting thread, it is
possible to insert the adjustable stand or to fix commercially
available castors with M8 screws.
The adjustable stand offers an adjustable range of height from
0 to 20 mm.
SAFETY NOTE:
When used properly, the recommended maximum load capacity
for each adjustable stand is 60 kg.
Connectors with adjustable stand.
1
The connectors with adjustable stand are connected with the
profiles the same way as the basic connectors (see pages 12 | 13) .
2
The connectors allow a height adjustment in a range from
0 – 5 mm. The stands are screwed into the connectors with an
M6 thread.
SAFETY NOTE:
When used properly, the recommended maximum load capacity
for each adjustable stand is 50 kg.
incl. s
tand Connecting thread
9 298 853
E.g. 3-way
connector with stand
9 298 831 / 9 298 832
Corner connector.
1
Each of the two profile ends to be joined must be cut at a 45° angle.
2
With a distance of 40 mm (stop plate F2 ) to the upper end of
the profile the drilling for the threaded pins has to be made.
3
Now the corner connector can centrally be inserted into the profile.
Afterwards, the second profile can be slided over the protruding end of
the corner connector.
4
Finally, screw in the threaded pins to secure the connection.
Alternative profile attachment.
Universal connector.
1
Drill a 4 mm diametre core bore in the centre of the profile‘s width
(18 mm). Drilling depth approx. 10 mm.
2
At the same position a maximum 1 mm deep countersink with a
11,0 mm diameter has to be drilled. Afterwards put the universal con-
nector at its position and slightly knock it in with a hammer.
3
Screw in the cylinder head screw 82939.**** (M5 x 35 mm).
4
Slide the required connection profile provided with a drilling for the
threaded pin (stop plate F1 ) onto the universal connector, insert the
threaded pin and screw it tight.
Universal connector
82937.****
Cylinder head screw
82939.****
Corner connector
82936.****
1
1
3
3
2
2
4
4
CADRO Base.
4
1
8 mm
43 mm