28 | 29
CLICK !
10
2
3
Assembly.
The assembly of the frame is done in the same way as described on
page 12 | 13. As for the lighting profiles and connectors for lighting and
cable guidance, their use results from the previous planning
(Example described on page 26).
Integration of LED lighting strips.
1
Now the self-adhesive LED lighting strips are simply glued into
the lighting profiles according to the planning.
Alternatively, the flexible LED lighting strips can also be laid directly
in the frame across the corners.
2
The illuminated areas of the profiles are covered by the diffusing
profiles
Laying the cables.
3
For an invisible power supply, the cables are guided through
the lighting profiles to the connector for power supply being covered
afterwards by a cover profile which matches the colour of the frame.
PLEASE NOTE:
Experience has shown that one lighting profile can accommodate
a maximum of 3 cable lines (6 x 1.5 mm outside diameter). In its
cross section the closed duct measures 2,9 x 8,8 mm.
Power supply.
Cable exit.
All cables are guided through the connector for power supply towards
the outside, that is usually towards the wall - in case of hanging furniture
mostly upwards, as for standing furniture also downwards.
For the connection to an LV-transformer, a plug is now being attached
to each pair of cables.
CONEXIS.
Now, the connection to a commercially available transformer can be
made. Our CONEXIS power distribution system offers a particularly
convenient and versatile way of electrifying your CADRO piece of
furniture. It allows you to easily and safely integrate a large number of
power connections into the furniture - both 230 V and 24 V as well as
12 V including switching system.
Find out more, we would be happy to introduce CONEXIS to you.
Plug mounting.
For this purpose, the ends of the cables which are already provided with
sleeves are inserted into the Mini AMP plug. Please pay close attention
to the black / white marking of the cable and the position of the plug
(see figure on the right)
. After the automatic locking, the plug and the
cable are permanently connected to one another.
CADRO Lighting.
1
10
Connector for
power supply
82974.****
Mini AMP plug
45074.****
Cable of the
LED lighting strip
Cover profile
9 298 819
Diffusing profile
9 298 818
LED lighting strip
alternative
Summary of Contents for CADRO
Page 1: ...Rahmensystem Technical Information and Assembly...
Page 47: ...06_2022_HMV...
