Hettich CADRO, Technical Information, Page: 45 / 47

46 | 47
A
B
B
A
F1
33,8 mm
35 mm
50,8 mm
1,8 mm
4,5 mm
8 x 55 x 55 mm
32 mm
19 mm
12 mm
4 mm
CADRO Room concept.
Fixing elements.
Wall / floor attachment 18 x 18 mm.
The wall / floor attachment is simply screwed onto the fixing surface with
a suitable countersunk screw (min. length 60 mm), if necessary with a
dowel.
Wall / floor attachment
55 x 55 mm.
This wall / floor attachment inludes a mounting plate and a cover. The
mounting plate is fixed to the fixing surface with four screws. After
mounting of the profile, the plate and the screws neatly disappear behind
the cover.
Wall / floor / ceiling attachment.
The wall / floor / ceiling attachment is integrated into the profile frame,
so that the frame can be placed parallel to a wall, ceiling or floor. The set
including the clamp 83172**** offers the possibility to mount the frame
at two different distances by choosing the required angle (
A
+
B
).
For example in order to bridge baseboards without any problems. The
cover then helps to hide the srews almost seamlessly.
SAFETY NOTE:
Provided that the attachments have correctly been fixed to the wall,
floor or ceiling, we recommend a maximum tensile load of 30 kg
per attachment. The supplied attachments have been designed for
common, solid masonry materials. The suitability of the fastening
elements therefore must be checked on site.
Wall
Wall
Wall
Wall / floor attachment
9 303 942 / 9 303 943
Wall / floor / ceiling attachment
83099.****
Clamp
83172.****
Wall / floor attachment
9 303 940 / 9 303 941
SAFETY NOTE:
Provided that the attachments
9 303 940 / 9 303 941 and
9 303 942 / 9 303 943 have correctly been fixed to the wall or
the floor, we recommend a maximum tensile load of 25 kg
per attachment.
44 | 45