56
9. Servicing / care
1. General information
56
Working on electrical components
56
2. Instructing maintenance personnel
56
3. Making the machine safe on shutdown
57
4. Cleaning the machine
57
Electric motors
57
5. Servicing work
57
Servicing and maintenance
57
Servicing unit
58
6. Instructions on inspections
58
General
58
1. General information
Inadequate, improper and / or unpunctual servicing
will increase risk potential and may lead to operating
malfunctions, high repair costs and long down times. The risk
is borne solely by the owner.
Working on electrical components
Faulty electrical components must only be replaced with
replacement parts of identical design.
Before attempting any work on electrical equipment, always
disconnect it from the power supply and consult qualified
personnel.
DANGER!
Electrical operating equipment as well as specific parts
of these devices may carry a dangerously high level of
voltage even when they are switched off.
For this reason, handling electrical operating equipment
improperly may result in serious damage and / or damage to
property.
WARNING
Electrical equipment must only be repaired by qualified
personnel.
Before attempting any work, reliably disconnect the device
concerned from the mains power supply and earth it. Only use
approved replacement parts (e.g. fuses) with specifications
that match the data in the equipment parts list.
2. Instructing maintenance personnel
Before attempting any work, familiarise yourself with the
machine as well as with this operating manual and always
work in a way that meets the safety requirements.
Also follow any non Hettich operating instructions in the
appendix to this operating manual.
Before attempting any maintenance measures, make sure
that:
•
the machine has been shut down and prevented from
switching back on again and cannot be started up
unintentionally or by mistake
•
the compressed air supply to the machine is shut off and
the machine is depressurized
all intended work is brought to the attention of a supervising
person.
WARNING
Immediately replace worn and / or damaged
components. Otherwise, you will jeopardise your
personal safety, the machine's operating safety and the
safety of your surroundings.
Servicing / care
Summary of Contents for BlueMax Mini Modular Plus
