Hettich BlueMax Mini Modular Plus, Operating Manual

Page: 36 / 88

36
9. Trial run with / without material
It is recommended to first carry out a trial run without
material and drill bits to test all functions for proper working
order. If all functions are working properly, fit the required
tool.
Depending on connection, use the hand or foot switch for
function testing.
Start a trial run without material. Afterwards, you should
carry out a test with material.
Check work for correct results. You can start production if all
settings are correct.
Preliminary conditions
• All of the necessary activation processes must have been carried
out.
• The compressed air must be turned on.
• The machine must be set up for the relevant product.
• Make sure the machine is running smoothly and and not
erratically.
• The operator must always be informed about current work
procedure.
10. Concluding start up
• After completing all servicing and set up work, make sure
everything has been done properly
• Check all screws and connections for secure fit
• After completing the check, you should carry out a test
using a component
• Start up may only be concluded once the machine is
working properly
• Now switch the machine off and hand over production to
the operator
• The operator must always be informed about the production
settings currently in effect and given instruction on work procedure
• Production can now commence.
NOTE
Following servicing work, check all safety guards for
proper working order.
Start up / trial run