Hettich BlueMax Mini Modular Plus, Operating Manual

Page: 21 / 88

21 21 21
Calibration:
The sensor must be on the magnetic strip!
> Switch off device
–> Switch device back on again by simultaneously pressing
button
–> This triggers the sensor calibration and displays "Cal 0".
Slowly move sensor in one direction on the magnetic strip.
On completion of calibration (display "Cal 0" … "Cal 4") the
display returns to the normal status
Parameter Specification Default
P01: A
System configuration:
A = 0: positive counting direction
A = 1: negative counting direction
0
P02: A
Display mode:
A = 0: mm display symbol " mm "
A = 1: inch display symbol " Inch "
A = 2: mm display symbol " m "
A = 3: mm display symbol " ° "
A = 4: mm display no symbol
0
P03: A Decimal point (0…4) 2
P04: A
Standby:
0: Sleep mode deactivated (not recommen-
ded)
Auto power ON when sensor moving or
button press (button F)
01
P05: ABC
Button lock:
A: " SET "
(0 = not active) -
(1 = active)
B: " Incr/Abs " (0 = not active) -
(1 = active)
C: " * " (0 = not active) -
(1 = active)
000
P07: A
Basic resolution:
A = 0: resolution 0.01 mm
A = 1: resolution 0.1 mm
0
P08: Multiplication factor (0.0001…9.9999) 1.0000
P09: Reference value (-999999.9… + 999999.9) 0.0
P10: Offset dimension 1 (-999999.9… + 999999.9) 0.0
P11: Offset dimension 2 (-999999.9… + 999999.9) 0.0
P12: Offset dimension 3 (-999999.9… + 999999.9) 0.0
P13: A
Configuration of offset dimensions (0…3)
A = 0: offset dimensions cannot be
selected
A = 1: offset dimension 1 can be selected
A = 2: offset dimensions 1 and 2 can be
selected
A = 3: offset dimensions 1 and 2 and 3
can be selected
3
P9: Software version X.XX