Hettich BlueMax Mini Modular Plus, Operating Manual

Page: 50 / 88

50
Operation
8. Operation
1. Safety check 50
General information 50
Readiness for use 50
Controls 51
2. Switching on 52
Preparatory work 52
3. Operating 52
Hold-down clamp 53
Fitting Hettich hinges 53
Drilling 54
Pressing in 54
4. Malfunctions during operation 55
Troubleshooting 55
5. Checks during operation 55
Checks for proper working order 55
1. Safety check
CAUTION
This machine must only be operated and serviced by
skilled personnel who have been authorised or trained
to do so. Always observe the safety precautions and
internal safety rules.
Before switching the machine on, satisfy yourself that
•
any installation, set up and servicing work have been
completed in full
• no persons are present in the danger zone,
let alone working on it
• all safety guards are fitted in the prescribed way
• the compressed air supply is ready for operation
General information
Before commencing production:
Make sure the machine is safe and in proper working order
before and after you switch it on.
Make sure the compressed air supply is ready for operation.
Make sure the machine has been set up for the relevant
product.
NOTE
Immediately inform your line manager of machine
malfunctions or faults.
Readiness for use
The machine is ready for operation if
•
all of the above stated activation processes have been
carried out
• a trial run has been carried out
• the compressed air supply is activated
• the machine is set up for the relevant product
Production can now commence.