Hettich 77566, Operating Manual

Page: 72 / 840

72
en
1173 Threaded stud DIN 914 - M 4x8
1174 Cheese head screw DIN 912 - M 10x35
1175 Spring washer DIN - A 10 each
1179 Cylindrical pin DIN 7 - ø 4 M 6x20
1180 Customised drilling unit block, 4-spindle, 45/9.5
1181 Customised drilling unit cover, 4-spindle, 45/9.5
1182 Customised auxiliary spindle with chuck
1183 Pinion, teeth = 17
1184 Customised deep groove ball bearing 607 - 2RS
1185 Special seal
1186 Customised drilling unit block, 6-spindle
1187 Customised drilling unit cover, 6-spindle
1188 Customised drilling unit block, 4-spindle, 38/8
1189 Customised drilling unit cover, 4-spindle, 38/8
1190 Customised auxiliary spindle with chuck
1191 Customised main spindle with chuck
1192 Pinion, teeth = 16
1193 Pinion, teeth = 25
1194 Pinion, teeth = 39
1221 Swivel unit
1223 Handle rod for swivel unit
1225 Fixing plate for sensor roller
1247 Threaded stud DIN 553 - M 8x40
1248 Washer DIN 9021 - A 8.4
1249 Self locking hexagon nut DIN 982 - M 8
1250 Bush
1251 Spherical knob
1252 Spring washer DIN 2093 B 22.5 size 1
1253 Standard insertion die => article number
1256 Threaded stud DIN 551 - M 5x16
1257 Hexagon nut, DIN 934 - M 5
1258 Hexagon nut, DIN 934 - M 8
1259 Cheese head screw DIN 912 - M 8x25
1260 3/2 way valve with sensor roller
1262 Serrated lock washer DIN 6791 A 5.3 - spring steel
1263 Self-tapping screw DIN 7500 -
M 4x10 - C/ II
1264 Elbow union M 5, swivelling, ø 4
1265 Oval cross-recessed head screw, DIN 7985 -
M 3x14
1319 Strip for hand level linkage system
1320 Linkage system for cranked hand lever
(can be used in left / right)
Replacement and expendable parts
12. Replacement and expendable parts
Please note that the manufacturer‘s declaration or declaration
of conformity given by Paul Hettich GmbH & Co. KG as manu-
facturer will lose its validity if non approved replacement parts
are installed.
1101* Boring block
1102* Drilling unit cover
1103* Auxiliary spindle with chuck
1104* Main spindle with chuck
1105* Pinion, teeth = 21
1106* Pinion, teeth = 32
1107 Guide column
1108 Base plate
1109 Connecting bracket
1110 Hexagon nut DIN 936 M 12x1 galvanised
1111 Drill depth stop M 12x1
1112 Guide plate
1113 Work surface 400 mm x 800 mm
1114 Fence 800 mm
1115 Base profile 465 mm
1116 Guide screw M 6x12
1117 Guard
1118 Flat head screw with slot and dog point
1119 Fence bracket assembly
1120 Cap for chuck
1121 Cable grip HM (type 2)
1122 Suction extractor funnel assembly
(without mounting)
1124 Extractor metal cover (without mount)
1125 Straight cable grip PM (type 3)
1127 T-slot screw
1128 Hexagon nut, DIN 934 M 8
1130 Self-tapping screw DIN 7500 -
M 5x10 - C/ II
1131 Spring washer, DIN 127 - A 5 each
1151 Deep groove ball bearing 6000 - 2RS
1152 Bushes MB 3030 DU
1154 Compression spring HM (type 2)
1155 Compression spring PM (type 3)
1156 Pendulum stop assembly => article number
1161 Knock in sleeve ø 10x12
1162 Cheese head screw DIN 912 - M 6x10
1163 Cheese head screw DIN 912 - M 8x10
1164 Square nut DIN 562 - M 8
1165a Threaded stud DIN 913 - M 6 x 5
1167 Cheese head screw DIN 912 - M 6x12
1168 Cheese head screw DIN 912 - M 8x20
1169 Cheese head screw DIN 912 - M 10x25
1172* Dust seal
* These replacement part nos. only apply to the standard
4-spindle 52/5.5 mm drilling unit. A list of parts for configuring
other drilling unit is provided at the end of this table.