Heston Blumenthal Everdure HUB, Assembly, Operation & Maintenance Instructions

Page: 12 / 92

12
Assembly, Operation & Maintenance Instructions
BARBEQUE ASSEMBLY
The barbeque must be fully assembled before use. Only a medium size Philips screwdriver and an adjustable spanner are needed.
Open the carton and remove the parts (Note that the barbeque chassis assembly is heavy and will require at least 2 people to move). Remove all packaging (especially check inside
the barbeque and under the charcoal grid) and place parts on a clean surface. Check for any damage or missing parts (if found, contact your service department).
INCLUDED PARTS HUB
TM
PACKAGING
Remove all internal cartons and packaging from within the barbeque assembly. Remove all external packaging and remove the appliance from the packaging base before operation.
Recycle as per your local government laws.
01/ Barbeque Chassis
Assembly x 1Pc
09 / Element Heat
Shield x 1Pc
02 / Lid Handle
x 1Pc
10 / Left Hand Open
Grill x 1Pc
03 / Lid
x 1Pc
11 / Right Hand Open
Grill x 1Pc
04 / Lid Hanging
Bracket x 2Pcs
12 / Rotisserie Rod
x 1Pc
05 / Top Panel Cover
x 2Pcs
13 / Cliplock Fork™
x 4Pcs
06 / Charcoal Grid
x 1Pc
14 / Leg Left Front
x 1Pc
07 / Charcoal Chamber
x 1Pc
15 / Leg Left Rear
x 1Pc
08 / Element Support
x 2Pcs
16 / Leg Right Front
x 1Pc
17 / Leg Right Rear
x 1Pc F01 / M4x10mm
x 2Pcs F02 / Hex Bolt
M6x12mm x 16Pcs
F03 / Spring Washer
Ø4mm x 2Pcs
F04 / Washer Ø4mm
x 2Pcs