HES HS1102S, User Manual

Page: 14 / 35

Hwang Sun Enterprise Co., Ltd. Edition 2012/06 13
6. Check the air pressure of dispensing nozzle is on
the setting range. (2.5
～
3 kg/cm
2
)
7. Before filling into the inert-gas, please tighten
the tank lid by the two buckles.
And then open the valve for filling.
(Max. pressure 1.0 kg /cm
2
is for inert-gas filling)
8. If need to open the tank lid, please turn off the
inert gas input the tank by adjusting valve. Using
the release valve to release the pressure inside the
tank then open the lid.
2-6-1 PROCEDURE OF TURNING OFF MACHINE
1. TURN OFF THE POWER SWITCH ON
CONTROL PANEL. (“OFF” POSITION)
2. Trigger dispensing nozzle to release inner
pressure of dispensing nozzle.
BUCKLE
VALVE
ADJUSTING
VALVE
RELEASE
VALVE