TW-800R-SCL/TW-800T
11
■5.Installation
5-1.Transmitter
Transmitter is used by attaching to various kinds of tools such as torque wrench, plier wrench, check pen, battery
tool etc. As plier wrench and check pen are original products of Herutu Electronics, basically it is shipped with
transmitter attached.
The torque wrench can be attached to the following manufacturer's products.
TOHNICHI Mfg. Co., Ltd.
:
LS type
(
QLLS, QSPLS, etc.
)
Nakamura Mfg. Co., Ltd.
:
MBtype
(
N-SPK-MB, N-QSPK-MB, etc.
)
For other tools installation please contact sales department.
<Installation the transmitter to torque wrench>
①
To install the seat
Fix the Seat with four fixing screws.
For the application with heavy oil mist, fill up the caulking agent between Wrench seat and Seat and also
betweenWrench shaft and Wrench seat to protect the internal board.
②
Fix the Transmitter Limit SW with two hexagon socket head bolts(which was removed).
Verify that the moving range of wrench lever is well suited for the movement range of switch during the wrench
in movement.
The hexagon socket head bolt requires a washer.
Hook the Transmitter on the Case holder of Seat, set it with an attention being paid not to bite the cord, and fix it
with the set screw as firmly pushing the case.
Apply the screw locking agent
onto the 2 to 3 threads of screw
edge.
Apply the screw locking agent on 2 to 3 threads of
hexagon socket head bolt.
Wrench lever
It hooks on a case fixed nail
×4