83
Show OSD Time:
Turns on / off the device time information displayed
on the monitor screen.
Show channel name:
Turns on / off the channel name information
displayed on the monitor screen.
Show after boot:
Select the number of split screen display screen.
5.3.6.4 Exceptions
Set the alarm mode of abnormal events. When an abnormal event occurs
during the operation of the XVR device, the system executes the alarm
linkage action.
Disk Exception
The steps are as follows:
Step 1:
On the menu page, select "Configuration →Exceptions →Disk
Exception" to enter the disk exception setting interface, as shown in Figure
5-44.
Step 2:
Select the event type, click "Enable", and enable the sending of mail
and buzzer alarm.
Step 3:
Click "Apply" to save the configuration.
Figure 5-44
Event type:
Including No Disk and Disk Error in two cases.
Enable:
Turns on / off disk exception alarm.
Screen display:
Turns on / off the screen display when the device is alarmed.
Send e-mail:
Turns on / off the sending mail function that occurs when a disk
exception, send mail to the specified mailbox.
Buzzer alarm:
Turn on / off the device beep alarm function, that is, the buzzer
sounds when a disk error occurs.
