69
Time format:
Choose a 24-hour or 12-hour format.
Receive date/time from NTP:
Check "
" to enable NTP time update
function. You can also reset the NTP server by setting the server, port,
and selecting the time zone and NTP update interval.
NTP Server:
Enter the IP address or domain name where the NTP server
is installed.
NTP Port:
Set the port of the NTP server.
Interval (Min):
The interval between two time intervals can be set to
0-255 minutes for the NTP update interval.
Daylight-saving time:
Check "
", open the daylight saving time
function, set the relevant parameters, such as type, date, start time, end
time and so on.
Channel check time:
Select the channel, click "Save", set the channel
time and XVR time consistent.
5.3.6.2 Network
IP/Port
Set the IP address and DNS server of the XVR to ensure that the other
devices in the network can communicate with each other. The IP/Port setup
steps are as follows:
Step 1
：
On the Menu interface, click "Configuration →Network →IP/Port" to
enter the IP/Port interface, as Figure 5-34 shows.
Step 2
：
Configure related network parameters such as IP address, subnet
mask, gateway, and preferred DNS.
Step 3
：
Click "Apply" to save the settings.
