112
Figure 6-18
Date
Set the system date of the device, and manually set the system time,
synchronize with the computer, or set the system date using the Network
Time Protocol (NTP) function as required.
Set the system date as follows:
Step 1:
In the main interface, click "Configuration →System →General
→Date" to enter the date setting interface, as shown in Figure 6-19 below.
Step 2:
Select the setting date type, there are the following three ways.
Turn on the Set date/time manually; manually select the date and
time, click "Save", the system automatically synchronizes with the
manual setting time.
Turn on synchronization with the computer, click "Save", the
system automatically synchronizes the time to the computer that
logs in to the WEB page.
Turn on the Receive date/time from NTP, select NTP server (or
select custom server, enter custom server domain name), select
the device's time zone, enter NTP port, set NTP interval, date
format, date separator, time format, single Click "Save" to
synchronize the system time with the NTP server time.
The date setting parameters are described in the following table:
Parameter
Description
NTP Server
Select the server domain name where the NTP
service is installed.
Custom NTP
server
When the NTP server selects "Custom", enter the
NTP server domain name.
