74
Message interval (Min):
The interval between sending emails. After the
email sending interval is set, when the alarm is triggered, the system
does not trigger the immediate sending of the email according to the
alarm signal. Instead, the email is sent according to the interval time of
the same type of event email. Avoid frequent alarms and generate a lot
of mail, causing the mail server to be overstressed. The time range is
0~600 minutes, and 0 minutes means that the mail is sent without
interval.
Encryption:
Select the Mailbox server encryption, including NONE, SSL,
TLS, and default "SSL".
Attach File:
Turn on/off the email attachment function. After the alarm
is turned on, the system can send snap shots when the alarm is sent.
Time period (1/2):
Set the time range for sending mail. After setting,
send the alarm message at that time; do not send mail at other times.
Enable auto E-mail:
Enable / disable automatic email sending.
Email interval (min):
Mail sending interval.
E-mail test:
Test email sending and receiving functions are normal. In
the correct configuration, the receiving email will receive a test email.
Before the email test, you must click Apply to save the email
configuration information.
P2P
P2P is a private network penetration technology. It does not need to apply
for a dynamic domain name, perform port mapping, or deploy a transit
server. You can directly scan the QR code to download a mobile client. After
registering an account, you can add and manage multiple IPC, NVR, XVR
devices simultaneously on the mobile client.
You can add devices in the following two ways to manage multiple devices.
1) Scan the QR code for the mobile phone system, download the App and
register the account. For details, see the App User Manual on the website.
2) Log on to the P2P platform, register an account, and add the device via the
serial number.
Instruction
With this function, the device must be connected to an external
network; otherwise it will not work properly.
P2P steps are as follows:
Step1:
On the main menu page, click "Configuration → Network → P2P" to
enter the P2P interface, as shown in Figure 5-37 below.
