28
Figure 4-7
After the device normally starts up, the default setting is to preview in
multi-screen display mode. Products with different channels has different
amount of split screens to display. On the preview interface, you can set the
appropriate date and time. On the bottom left of the screen, it shows the
recording status of each video channel or alarm status icon.
The function of each icon is shown in the following table:
Icon
Function
The monitoring channel is in video.
The monitoring channel is in the motion detection
state.
Table 4-1
4.4 Quick add device
In the preview interface, you can quickly add a webcam to a channel that is
not connected to the webcam, as shown in Figure 4-8 below:
○
1 At the preview menu, for the channel of unconnected IP Camera, click
anywhere in the channel interface, the lower left corner of the channel
display “+” icon.
