Henny Penny FlexFusion SpaceSaver Plus FSE- 610, Operating Manual, Page: 18 / 96

Description of the unit
18 Operating instructions
Perfection (regeneration)
Perfection is a cooking mode, in which cooled food to be cooked can
be kept warm and prepared in a short time in a temperature range of
30 °C (86 °F) to 180 °C (356 °F).
Delta-T cooking
Delta-T cooking is a cooking mode where the cooking temperature
depends on the core temperature of the food being cooked.
The cooking temperature is always higher than the current core
temperature by the set value (Delta-T value, cooking temperature
difference). The resulting cooking time is longer than with other
cooking modes.
Delta-T cooking is especially well-suited for general cooking. The
food being cooked remains tender and juicy with little weight loss.
Low-temperature cooking
Low-temperature cooking is a cooking mode, in which the food to be
cooked is cooked particularly gently in a temperature range of 30 °C
(86 °F) to 100 °C (212 °F).
The cooking time is considerably longer than at higher temperatures,
but no supervision is required and the cooking time can be extended
considerably without any loss in quality.
The food being cooked remains tender and juicy with little weight
loss.
Baking
Baking is a cooking mode in which the texture of the food to be
cooked is loosened and then cooked and browned by hot air in a
temperature range of 30 °C (86 °F) to 220 °C (428 °F). Before baking
takes place, a humidifying process and its associated acting time can
be performed.
3.3.3 Expanded cooking functions
Expanded cooking functions can be used to adapt individual cooking
steps to the particular food being cooked.
The following expanded cooking functions are available:
PerfectHold
PerfectHOLD is a cooking function, in which the food to be cooked is
kept warm in the unit at a temperature range of 50 °C (122 °F) to 100
°C (212 °F) after the actual cooking process, until it is ready to be
served.
Ready2Cook (preheating)
For many cooking programs such as baking, for instance, the correct
starting temperature is important.
FM05-161-G