Henny Penny EVOLUTION ELITE EEE-181, Technical Manual

Page: 43 / 118

Model EEE-182
6-1
This section provides checkout and replacement procedures,
for various parts of the fryer. Before replacing any parts, refer
to the Troubleshooting Section to aid you in finding the cause
of the malfunction.
1. A multimeter will help you to check the electric
components.
2. When the manual refers to the circuit being closed, the
multimeter should read zero unless otherwise noted.
3. When the manual refers to the circuit being open, the
multimeter should read infinity.
Do not move the fryer with hot oil in the vat or filter
pan. Severe burns can result from splashing hot oil.
To ensure a long life of the fryers and their components,
regular maintenance should be performed. Refer to the chart
below.
Frequency Action
Daily Filter the oil (See Daily Filtering
Instructions Section in Operator’s
Manual)
Daily Change Filter Pad (See Changing
Filter Pad Section in Operator’s
Manual)
Every filter pad change Lubricate filter pan o-rings
Quarterly Inspect/Change Filter Pan O-Rings
(See Check/Replace Filter Drain Pan
O-Ring Section)
When oil smokes, Change oil
foams-up violently,
or tastes bad
Every change of oil Clean Vat (See Clean-Out Mode
Section in Operator’s Manual)
SECTION 6. MAINTENANCE
6-1. INTRODUCTION
6-2. MAINTENANCE HINTS
6-3. PREVENTIVE
MAINTENANCE
July 2016