Henny Penny
Chick-fil-A Controls
If any of the product settings do not match original values, the following
message is displayed (with one or more of the product numbers
blinking):
“10: PROD’S 123456”
“10: DO NOT MATCH”
“10: ORIG. VALUES”
In this case, the blinking numbers indicate which products do not match
original settings. If the numbers 3 and 5 are the only numbers blinking,
then product #3 and product #5 each have at least one setting changed
from their factory preset values. Products 1, 2, 4, and 6 are confirmed
to exactly match their original settings.
The second item in section 10 identifies how many items in CFA
Programming Mode have been changed from their original values.
These Chick-fil-A settings mainly deal with special Chick-fil-A
controller features like Oil Wear, Heat-up Monitoring, New Oil
Compensation, Oil Idle Compensation, Drop Detection, Clean-out
Mode, and Amps and Voltage alarms.
If all items in CFA Prog Mode match their original, factory preset
values, the following report is made:
“10: ALL CFA ITEMS”
“10: MATCH”
“10: ORIG. VALUES”
If any of the items in CFA Prog Mode do not match their original
values, the following message is displayed (with the actual number of
changed items):
“10: 2 CFA ITEMS”
“10: DO NOT MATCH”
“10: ORIG. VALUES’
A similar report is made for Special Program Mode. Special Program
(SP) Mode settings deal with °F/°C display, speaker tone and volume,
Melt and Idle Modes, and how the product buttons function (start cook
or merely select product).
“10: ALL SP ITEMS”
“10: 1 SP ITEMS “
“10: MATCH “
“10: DO NOT MATCH “
“10: ORIG. VALUES “
“10: ORIG. VALUES “
3-3. DIAGNOSTIC MODE
DETAILS (Continued)
602
3-25
