Henny Penny
Chick-fil-A Controls
2-4. WARNINGS AND
ERROR MESSAGES
The controls monitor procedure problems and system failures with
warnings and error codes. The display shows the warning or error
code, and an alarm sounds.
Pressing cancels most warnings, and pressing any control button
stops most Error Code alarms. But there are some exceptions (see
below). The display shows the error until the situation is corrected.
WARNINGS
DISPLAY
CAUSE
CORRECTION
“W-1”
Incoming supply voltage too low.
Have voltage at plug and receptacle checked.
“LOW
VOLTAGE”
“W-2”
Faulty components or connections.
Have elements, connections, and contactors
“SLOW
checked.
HEAT-UP”
“W-3”
Product loaded into frypot
Wait until peanut oil is at proper temperature
“WAS NOT
before lights.
before loading product.
READY”
“W-4”
Frozen or too much product
Do not overfill or place frozen product
“SLOW
in frypot.
into the frypot.
COOKING”
“W-5”
Product loaded into frypot
Wait until peanut oil is at proper temperature
“SLOW
before lights.
before loading product.
COOKING”
“W-6”
Faulty components or connections.
Have elements, connections, and contactors
“SLOW
checked.
COOKING”
“W-7”
Faulty components or connections.
Have elements, connections, and contactors
LOW AMPS
checked.
“W-9”
Product overcooked. (May
Discard product immediately.
“DISCARD
appear after a Slow Cooking
PRODUCT”
warning.)
“OIL TOO
Didn’t allow peanut oil to drop
Cancel button will not stop this warning. Once
HOT”
down to current product’s setpoint
the peanut oil temperature drops to setpoint
temperature.
temperature, the alarm automatically stops.
2-8
602
