Henny Penny CFE-415, Operator'S Manual

Page: 49 / 82

Model CFE-415, 427
45
March 2015
9. OIL DATA (current batch; resets by Clean-Out Mode)
Press ▼ to step through the following data:
(During steps 9S through 9V, press the product buttons (or Manual Prog) to see data
on individual product items.)
Press to continue onto PREV OIL DATA log.
4-1
INFORMATION MODE
DETAILS
(CONT.)
Function Display Example
The day current batch of oil was started 9A. SINCE APR-1
No. of days with data included in totals 9B. DAYS CNT 10
Number of monitored heat-ups 9C. HEAT-UPS 75
Number of slow heat-ups 9D. SLOW HT’S 2
Max time to heat 270°F to 310°F 9E. MAX HT TM 3:25
Lowest “peak rate” of all heat-ups 9F. MIN RATE 0.43
Maximum voltage 9G. MAX VOLT 102%
Minimum voltage 9H. MIN VOLT 91%
No. of “low voltage” warnings generated 9I. LO VOLT’S 0
Maximum amp draw
9J. MAX AMPS 35
Minimum amp draw 9K. MIN AMPS 32
No. of “low amps” warnings 9L. LO AMP’S 0
Non-cooking time (hrs) while fryer was
on
9M. IDLE HRS 43
Total oil wear accumulated 9N. TOT WEAR 278
Total number of Cook Cycles 9O. TOT CK’S 125
Number of cycles started before ready 9P. NOT RDY’S 7
No. cycles quit early, (0:11 or more
remaining)
9Q. QUIT 11+ 1
No. cycles beeped *DONE* 21 sec or
more
9R. DONE 21+ 3
Individual product cook counts 9S. Px CK CT 77
Individual product “not detected” counts 9T. Px NO DET 3
Individual product “slow cook” counts
9U. Px SLO CT 0
Individual product “overloaded” 9V. Px OVRLD 1