Henny Penny CFE-415, Operator'S Manual

Page: 47 / 82

Model CFE-415, 427
43
March 2015
7. PREV DAY - SUN
Press ▼ to step through the following data. During each step, press
to choose the day of the week, of the past 7 days.
(During steps 7V through 7Y, press the product buttons (or Manual Prog)
to see data on individual product items.)
Press to continue onto 7-DAY TOTALS log.
4-1
INFORMATION MODE
DETAILS
(CONT.)
Function Display Example
Day this data was recorded for 7A. DATE APR-8
Time of day last heat-up was completed 7B. LAST HEAT 8:15P
Peak heat-up rate (°F/Sec) - last heat-up 7C. LAST RATE 0.88
Was that day’s last heat-up acceptable? 7D. LAST OK? YES
Heat cap. status (based on last 4 ht-ups) 7E. HEAT CAP GOOD
Number of monitored heat-ups that day 7F. HEAT-UPS 7
Number of slow heat-ups 7G. SLOW HT’S 0
Max heat time 270°F to 310°F that day 7H. MAX HT TM 1:11
Lowest “peak rate” - that day’s heat-ups 7I. MIN RATE 0.67
Max voltage that day (when fryer on) 7J. MAX VOLT 102%
Min voltage that day (when fryer on) 7K. MIN VOLT 98%
No. of “low voltage” warnings generated 7L. LO VOLT’S 0
Maximum amp draw that day 7M. MAX AMPS 35
Minimum amp draw that day 7N. MIN AMPS 34
No. of “low amps” warnings that day 7O. LO AMP’S 0
Non-cooking time (hh:mm) fryer was on 7P. IDLE HRS 7:09
Oil wear accumulated that day 7Q. OIL WEAR 39
Total number of Cook Cycles that day 7R. TOT CK’S 18
Number of cycles started before ready 7S. NOT RDY’S 2
No. cycles quit early, (0:11 or more remaining) 7T. QUIT 11+ 1
No. cycles beeped *DONE* 21 sec or more 7U. DONE 21+ 3
Individual product cook counts 7V. Px CK CT 12
Individual product “not detected” counts 7W. Px NO DET 1
Individual product “slow cook” counts 7X. Px SLO CT 0
Individual product “overloaded” 7Y. Px OVRLD 1