Henny Penny CFE-415, Operator'S Manual, Page: 40 / 82

Model CFE-415, 427
36
March 2015
3-15
CHECK / REPLACE FILTER
DRAIN PAN O-RINGS
To prevent oil leaking, and to keep filtering process operating properly,
the filter drain pan and filter screen o-rings should be inspected for nicks
and tears at least every 3 months.
Drain Pan O-Ring
1.
Push down on the drain pan latch and pull out the drain pan assem-
bly, using the handle on the drain pan.
This pan could be hot! Use protective cloth or glove, or severe burns
could result.
2.
Visually check the 3 o-rings on the tube of the filter drain pan for any
cracks or breaks and replace if necessary.
3.
To replace o-ring, use a small, flat-bladed screwdriver, pry up on o-
ring and pull off the end of tube. Roll new o-ring into notch on tube.
Lubricate o-rings on filter tube with fresh, cold oil & push filter drain
pan into position. (Lubricate first before installing).
Filter Screen O-Ring
1.
Push down on the drain pan latch and pull out the drain pan assem-
bly, using the handle on the drain pan.
This pan could be hot! Use protective cloth or glove, or severe burns
could result.
2.
Remove the contents from the drain pan (see Drain Pan Assembly
Section) to access the Filter Screen.
3.
Visually check the 2 o-rings for any cracks or breaks and replace if
necessary.
4.
To replace o-ring, use a small, flat-bladed screwdriver, pry up on o-
ring and pull off the end of tube. Roll new o-ring into notch on tube.
Lubricate o-rings on filter tube with fresh, cold oil & push filter drain
pan into position (Lubricate first before installing).