Henny Penny CFE-415, Operator'S Manual, Page: 27 / 82

Model CFE-415, 427
23
March 2016
During normal operation, the control automatically monitors vat oil
level. If the control senses oil level is too low, unit automatically
pumps oil from JIB (oil reservoir) into vat to keep oil at proper level.
The JIB (oil reservoir) must be filled at least once a day, preferably
in the mornings. This helps prevent an “E-1” error code. If control
displays “FILL RESERVE OIL ”, the JIB may need filled.
Manual Top-Off
If oil level is a little low, oil can be added to vat at any time from
JIB (oil reservoir) to raise oil level to proper level by following steps
below. This procedure is NOT to be used to fill an empty vat.
1.
Press and hold either one-full vat until display shows
“*FILTER MENU*” followed by “1.EXPRESS FILTER”.
2.
Press ▼ 5 times until “6. FILL FRM RESRV” shows in display.
3.
Press button; “FILL” & “DONE” is displayed.
4.
Press and hold left button; display shows “FILLING” and
oil is pumped from the oil reservoir to the vat.
5.
Once vat is full, release button; “FILL” & “DONE”
displays. Press right button and then for normal opera-
tion.
3-7
AUTO TOP-OFF