Operation 39
Figure 14: Screenshot of the navigation mode and the operating buttons of the ACS
No.
Element
Explanation
1.
Program number/name
The program shows the currently selected, pre-set
program. By switching to a different program, other
functions will be activated. The program selection
depends on the product being packaged.
2.
Functions
These functions are active or inactive. If a function is
active, it is displayed in a blue shade. If a function is
inactive, it is displayed in a grey shade.
3.
Function active/inactive
The selected function is marked with a green circle.
The name and current value of this function will appear
on the screen.
If the + functions are activated, the + is indicated
in colour. If these functions are not active, they are
displayed in a grey shade.
4.
Menu
The machine settings can be adjusted via the Menu
pictogram at the left of the function overview.
1.
Press the
▲
or
▼
buttons to select the desired program.
2.
Press the
◄
or
►
buttons to view the functions.
3.
After selecting the desired function, press Enter to view and adjust the function settings.
Users can view the pre-set configuration and the owner is also authorised to change it.
4.
Select the Machine Settings menu and press Enter to adjust the machine settings.
This menu can only be accessed by the owner. See Guideline for Function Values on page
46 for the possible limit values of the function values.
6.7.2.1 Programming the ACS Control Using the PC
You can import labels and programs from a USB stick by inserting the stick into the USB port of
your machine. You can create the data to be imported using the online software that is available on
the Support section of our website: http://www.henkelman.com/en/vacuum-packaging/advanced-
control-system.
Follow the steps below to create a program or label: