Henden Bluetooth Enabled Variable Speed Pump Installation Manual
HENDEN
INSTALLATION & OWNERS MANUAL
|
9
5. START UP
5.1 Pre-start up checklist
Speed setting chosen is a compatible
setting with other pool equipment
The pump is installed in a safe and dry environment
The pump enclosure has adequate drainage
in the event of leakage
Any transport plugs are removed
The pipe-work is correctly sealed and supported
The pump is primed correctly
The power supply is correctly connected
All steps have been taken for safe operation
The filter has been plumbed with 40/50mm pipe
6. LOW ENERGY OPERATION
Your Henden Variable Speed Pump has speed settings
from 1,050 to 3,100rpm:
- 1,050 – Lowest Speed, 1
- 3,100 – Highest Speed, 10
- Variable – Backwash Speed
• Speed 1 provides the lowest speed and therefore the
greatest energy efficiency and savings.
Operation
Recommended Speed
Setting
Backwashing your media
filter
Backwash Speed
Pool Filtration
Speed 1 to 4
Suction pool cleaner
operation
Speed 5 to 8
Manually cleaning your
pool
Speed 9 to 10
Water Feature operation
Spa Jet operation
In-floor cleaning systems
Solar pool heating
Guidelines for Recommended Pump Operating Hours:
Australian Standards AS3633: “Private swimming pools
- water quality” states that “The minimum turnover rate
shall be a single turnover of the full volume of the pool
water, within the period that the pump would normally be
operating….”
The table below provides a guide only to the running times
of your pump while in filtration mode in order to achieve
the minimum turn over rate:
Pool Size
(Litres)
Speed Setting (hours)
Speed 1
Speed 5
Speed 10
20,000
2.4
1.3
0.9
30,000
3.7
2.0
1.4
40,000
4.9
2.7
1.9
50,000
6.1
3.3
2.3
60,000
7.4
4.0
2.8
80,000
9.8
5.3
3.8
100,000
12.3
6.7
4.7
Summary of Contents for 8 Star
Page 2: ......
Page 20: ...P N 403214 4...
