background image

Henden Bluetooth Enabled Variable Speed Pump Installation Manual

16

 

|

 

HENDEN

 INSTALLATION & OWNERS MANUAL

DANGER Hazardous suction. Do 
not block water entry into filtration 
system with any part of your body 
as the pressure can trap hair or body 
parts, causing severe injury or death. 
Do not block suction.

Turn off pump immediately if 
someone becomes trapped.

Do not use or operate swimming 
pools, spas or spa baths if a suction 
cover is broken, missing or loose. 
Two suction covers and inlets must 
be provided into every pump to avoid 
suction entrapment.

Routine Maintenance tasks - to 
maximise the life of your pool 
equipment & personal safety, use this 
checklist once a week. Turn pump off 
first.

a.  Make sure that any pressure 

gauges are in working condition 
and the operating pressure is 
within limits as specified on the 
product.

b.  Make sure that each suction inlet 

and main drain has a cover that 
is securely attached and in safe 
working condition.

c.  Make sure that all skimmer covers 

are securely attached and in safe 
working condition. These should be 
replaced every 3 to 4 years.

d.  Remove any obstructions or debris 

from the main drain cover.

e.  Ensure the skimmer baskets and 

the pump hair and lint pots are free 
of leaves and debris at least once 
a week.

f.  Remove obstructions and 

combustibles from around the pump 
motor.

g.  Make sure all wiring connections 

are clean and that all wiring and 
electrical equipment is in good 
condition. Damaged wiring must be 
repaired or replaced by a qualified 
electrician as soon as damage is 
discovered.

h.  Check water balance and sanitiser 

levels at your local pool shop.

Caution! Do not add chemicals 
directly to the pool skimmer. Adding 
undiluted chemicals may damage 
pump and filter and void warranty.

In accordance with AS/
NZS60335.2.41 we are obliged to 
inform you that this device is not to 
be used by children or infirm persons 
and must not be used as a toy by 
children.

POWER CONNECTIONS AND WIRING 
MUST BE CARRIED OUT BY 
AN AUTHORISED ELECTRICIAN.

Summary of Contents for 8 Star





















Reviews: