Henden 8 Star, Installation & Owner'S Manual

Page: 10 / 20

Henden Bluetooth Enabled Variable Speed Pump Installation Manual
10 | HENDEN INSTALLATION & OWNERS MANUAL
7. FEATURES & FUNCTIONALITY
Your Henden Variable Speed Pump has several
operational features. The following explain each of these.
7.1 Multi-Coloured LED indicator light
• Used for identifying required settings for programming
time for full speed (Boost) cycling and warnings:
> Solid green = Normal dial operation
> Slow flashing green = In backwash mode
> Fast Flashing green = Boost cycling & AUX
external control
> Solid White = Time to Backwash
> Fast Flashing White = Fault detected - reset pump
> Slow Flashing blue = Operated by Bluetooth
> Solid blue = Bluetooth mode
7.2 Constant Flow/Speed Compensation
As the pool filter becomes dirty, pressure builds up. With
a typical pool pump, this would naturally slow the flow
coming through the system. The Henden Variable Pump
has the intelligence to automatically detect the resistance
applied by a filter and slowly compensate the reduction
flow, by increasing the speed of the motor. The result is
the flow remains constant between filter cleans.
When the Henden Variable Speed Pump detects that the
speed increase indicates time to backwash your filter, the
LED indicator will show a solid white display.
(see item 7.1 above).
7.3 Patented water cooled design for smooth
and super quiet operation
• The pump has a water cooled membrane and jacket
around the motor which helps to keep the pump cool
during operation
• Waste heat off the motor is transferred into the pool
water, helping to reduce pool heating energy costs
7.4 Weatherproof RJ45 Communication Port
(See page 5 for connection details)
• For communication and connecting to external pool
control systems
• For receiving a signal from a heat pump or gas heater
to ramp the VSD pump speed to full during the heating
process
• Service diagnostics and software updates (For Henden
use only)
7.5 Backwash Speed Cycling Technology
• When in backwash mode the pump will cycle between a
low and high speed to help agitate the filter media for a
more effective clean
• Reduces wasted water and chemicals during the
backwash cycling process
7.6 Full variable frequency drive with user
friendly selectable speed dial
• Provides for easy selection of desired filtration speed
• No complicated digital push button controls
7.7 Large 4.5 litre lint pot
• Provides for longer intervals between cleaning
8. BLUETOOTH FUNCTIONALITY
8.1 Bluetooth App Set Up
1. Open the “App Store” app that is
available on your device.
2. Search “Henden Pool Pump”
3. Install the app on your device
The app can be installed on to as many
devices as desired, however, only one device can control
the pump at any given time. The language and time of the
app is the same as your device setting. The measuring units
are automatically defaulted to your device’s region units,
however, you can choose between Litres, Gallons or m
3
/hr.
Pairing a device to the pump
1. Open app on your smart device.
2. Turn dial on the pump from
“off” to “Bluetooth”, you will
see the LED flash white for a
second.
3. On your device, press the
connect button.
4. When setting up for the first
time ONLY, select “YES” to
allowing location.
5. Please note that the first time
the devices are paired, there is
a 2 minute time limit to do so
before the procedure will have
to be repeated.
External Timer / Chlorinator
> A pop-up will appear asking if
you are using an external timer
or chlorinator to control your
pump. Please Select “YES” or
“NO”
** This is a safety function and
will not allow the chlorinator
to run without the pump
working.
Two modes are available, depending on whether you wish
to manually operate the pump or alternatively you can
create a schedule of operation.
This pop-up
will appear
Note: App screenshots are for demonstration purposes only. Actual screens may vary.