54
Technical specifications (EMC-RF)
Use only cables with the following specification:
USB shielded maximum 2 m
Serial shielded maximum 1.5 m
Guidance and manufacturer´s declaration – electromagnetic emissions
The HemoCue systems are intended for use in the electromagnetic environment specified below. The customer or the user of the
HemoCue systems should assure that it is used in such an environment.
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions
Group 1
The HemoCue systems uses RF energy only for its
internal function. Therefore, its RF emissions are
very low and not likely to cause any interference in
nearby electronic equipment.
RF emissions
Class B
The HemoCue systems are suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-
voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker emissions
IEC 61000-3-3
Complies
NOTE 1
It is the manufacturer’s responsibility to provide equipment electromagnetic compatibility information to the customer or user.
NOTE 2
It is the user’s responsibility to ensure that a compatible electromagnetic environment for the equipment can be maintained in
order that the device will perform as intended.
Summary of Contents for Glucose 201+
