HELI CQD16X1, Operation & Service Manual

Page: 57 / 105

53
bracket 1 or scissor plate 4.
2. The distance between tops of scissor plate assembly 4 is 366mm.
4.9 Electric System
4.9.1 General description
The electric system is equipped with a whole AC control system. With the
system, the control of the whole truck can be low noisy, high efficient, smooth and
safe.
The electric system is made up of intelligent instrument, traction control system,
lift control system, steering control system, battery, illumination system, back buzzer
(optional), harness and so on.
Traction control system consists of lateral hold type electronic rocking bar, travel
switch, foot brake, electromagnetic brake, traction control module, AC traction motor;
Lift control system consists of lateral hold type electronic rocking bar, valve
control module, lifting control module, AC pump motor;
Note: The products are subject to improvements and changes. If the products are
not corresponding with the manual, please contact with the manufacturer.
See attached figure for electric system principle diagram.
4.9.2 Detailed description of the electric system
1) CAN bus technology
The AC type electric reach truck applies the CAN bus technology. It links with
each CAN module (traction control module, lift control module, steering control
module, instruments display module) and acts as a connection point between the
outside equipments and the CAN bus. The hand manual of ZAPI brand can link with
every module and any other module in the network through CAN bus.
STE MODEL in the sub-menu is used to choose the module user wants to link
with. The data relating to the each module in the CAN bus is followed:
Related figures in CAN bus Module
01 VCM valve control