50
Figure 4-8-10 Structure of telescopic fork assembly
Note: disconnect the battery. If the telescopic fork needs to be disassembled
completely, disassemble the forward reaching assembly from the mast. Thus it is
easier for disassembly.
1) Remove the four bolts fixing the backrest (it is not shown figure 4-8-10) to the
fork plate then remove the backrest.
2) Remove the fork (it is not shown figure 4-8-10) from the fork carrier.
3) Extend telescopic fork and then place a wood piece of 50×100×200mm on the
right channel steel or left channel steel of item 1 as shown in figure 4-8-10.
4) Draw the forward reaching back until the combined roller 11 on scissor plate 4
lay against the wood piece.
Remove the forward reaching cylinder and the wood piece can prevent the
forward reaching assembly from drawing back.
5) Remove the hydraulic pipeline, solenoid valve, cable and accessories on
attachment.
6) Remove the part 9 and 10 of telescopic cylinder as shown in figure 4-8-10 and
then remove the left and right telescopic cylinder.
Summary of Contents for CQD16X1
Page 1: ......
Page 9: ...5 II External View of Reach Truck Figure 2 1 External view of reach truck ...
Page 102: ...98 6 3 Lubricating chart ...
Page 105: ......
