9.5.1 Setting of the upper and lower limit position of motor type HRSDC...-BI
7.6 Setup / Delete intermediate stop function
7.5.2 Correcting existing limit positions
-28-
HRSDC-ERSDC-BI_10.01_EN
7.7 Add an emitter (Copy from emitter A to emitter B) - 3 options
x3
Move to your
desired position
and press „Stop“
Press „Stop“ and
„Up“ simultaneously
for 2 seconds
Move to your
desired position and
press „Stop“
Press „Up“
for 2 seconds
x2
Press „Down“
for 2 seconds
+
Press „Stop“ and „Down“
simultaneously for 2
seconds
x2
+
x3
To change the existing limit position, the hanging must be at the respective limit position.
Press „Stop“ and „Up“
simultaneously for 5
seconds
+
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 1 second
Press „Stop“ and „Up“
simultaneously for 2
seconds
+
x2
Correct upper limit position
x1
x3
Press „Stop“ and
„Down“ simultaneously
for 5 seconds
+
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 1 second
Press „Stop“ and
„Down“ simultaneously
for 2 seconds
+
x2
Correct lower limit position
x1
x3
Move to your
desired position
P2
x1
x1
x2
Press „Stop“
for 1 second
Press „Stop“
for 1 second
Press P2
for 1 second
Press „Stop“
for 1 second
Important! -
To set the intermediate stop function, the limit positions must be already set.
To get to the intermediate position
please press the "Stop" button for
2 seconds.
If the motor is using the
step
function
, after pressing the „Stop“
button for 2 seconds the hanging
will move (regardless of the current
position) to the lower limit position
first and then to the set
intermediate position.
The intermediate position can also be deleted using the same procedure (motor confirms 1x each).
x1
x1
x3
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A
A
B
x1
x1
x2
Option 1
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press „Stop“
for 1 second
A
A
B
x1
x1
x2
Option 2
By the same procedure
the added emitter can also be
deleted.
x1
x1
x3
x1
x1
x3
Summary of Contents for ERSDC1038-02-BI
Page 16: ...16 Notes...
