-24-
HRSDC-ERSDC-BI_10.01_EN
x3
6.6.1 Setting of the upper and lower limit position of motor type ERSDC1038-02-BI
6.6.2 Correcting existing limit positions
To change the existing limit position, the hanging must be at the respective limit position.
Important! - Please note
• For adjusting the limit positions the motor needs to be connected to an emitter.
• Both limit positions must be set as described (coherently, in one operation).
• If a correction of the limit positions is required, please proceed as described at 6.6.2.
6.6 Adjustment of the limit positions
6.5 Change of rotation direction - 2 options
x1
Press P1
for 2 seconds
6.4 Connecting the motor to the emitter
0
1
Press Stop
for 2 seconds
x2
x3
Press P1
for 10 seconds
x3
b)
a)
Press „Up“ and „Down“
simultaneously for 2 seconds
+
With the limit positions already set, the direction
of rotation can only be changed with option b).
If no limit positions have been set, both options
are possible.
x1
0
1
release P1
x3
Move to your
desired position
and press „Stop“
Press „Stop“ and
„Up“ simultaneously
for 2 seconds
Move to your
desired position and
press „Stop“
Press „Up“
for 2 seconds
x2
Press „Down“
for 2 seconds
Notes for the emergency control (e.g. if the emitter is damaged) The hanging can be moved to the previously set limit position by pressing the P1
multi-function button. Pressing it again will stop the motor.
+
Press „Stop“ and
„Down“ simultaneously
for 2 seconds
x2
+
x3
Press „Stop“ and
„Up“ simultaneously
for 5 seconds
+
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 1 second
Press „Stop“ and
„Up“ simultaneously
for 2 seconds
+
x2
Correct upper limit position
x1
x3
Press „Stop“ and
„Down“ simultaneously
for 5 seconds
+
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 1 second
Press „Stop“ and
„Down“ simultaneously
for 2 seconds
+
x2
Correct lower limit position
x1
x3
Summary of Contents for ERSDC1038-02-BI
Page 16: ...16 Notes...
