-22-
HRSDC-ERSDC-BI_10.01_EN
5.9 Disable radio communication
When the radio link is disabled, previously set motor functions as well as the emitter codes are retained and only the radio reception is disabled.
This prevents undesired settings on other motors.
x2
Briefly press P1 to
enable the radio reception.
Press P1
for 6 seconds
5.7 Add an emitter (Copy from emitter A to emitter B) - 3 options
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press P2
for 1 second
P2
A
A
B
x1
x1
x2
Option 1
Press P2
for 1 second
P2
Press P2
for 1 second
P2
Press Stop
for 1 second
A
A
B
x1
x1
x2
Option 2
By the same procedure
the added emitter can also be
deleted.
Press P1
for 2 seconds
x1
x2
Option 3
Press „Stop“
for 1 second
B
By the same procedure
the added emitter can also be
deleted.
5.8 Enable / Disable step function
Press either the "Up" or "Down" button for a short
movement (release within 2 seconds), press one of
the buttons for more than 2 seconds and the motor
will start to run continuously.
Press „Up“ and „Down“
simultaneously for 5
seconds
+
x1
Press „Stop“
for 1 second
x1 = Step function enabled
x2 = Step function disabled
(continuos mode active)
Summary of Contents for ERSDC1038-02-BI
Page 16: ...16 Notes...
