Heicko ERSDC1038-02-BI, Installation And User Manual

Page: 21 / 30

Important! - Please note
• For adjusting the limit positions the motor needs to be connected to an emitter.
• Both limit positions must be set as described (coherently, in one operation).
• If a correction of the limit positions is required, please proceed as described at 5.5.2.
5.5 Adjustment of the limit positions
5.4 Change of rotation direction - 2 options
5.5.1 Setting of the upper and lower limit position of motor type ERSDC2803-35-BI
5.6 Setup / Delete intermediate stop function
Move to your
desired position
P2
x1 x1
x2
Press „Stop“
for 1 second Press „Stop“
for 1 second Press P2
for 1 second
-21-
Press „Stop“
for 1 second
Important! - To set the intermediate stop function, the limit positions must be already set.
HRSDC-ERSDC-BI_10.01_EN
Press P1
for 10 seconds
x3
b)
a)
Press „Up“ and „Down“
simultaneously for 2 seconds
+
With the limit positions already set, the direction
of rotation can only be changed with option b).
If no limit positions have been set, both options
are possible.
x1
Move to your
desired position
and press „Stop“
Press „Stop“ and
„Up“ simultaneously
for 2 seconds
Move to your
desired position and
press „Stop“
Press „Up“
for 2 seconds
x2
Press „Down“
for 2 seconds
Notes for the emergency control (e.g. if the emitter is damaged) The hanging can be moved to the previously set limit position by pressing the P1
multi-function button. Pressing it again will stop the motor.
+
Press „Stop“ and
„Down“ simultaneously
for 2 seconds
x2
+
5.5.2 Correcting existing limit positions
Press „Stop“ and „Up“
simultaneously for 5
seconds
+
To change the existing limit position, the hanging must be at the respective limit position.
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 1 second
Press „Stop“ and
„Up“ simultaneously
for 2 seconds
+
x2
Correct upper limit position
Press „Stop“ and
„Down“ simultaneously
for 5 seconds
+
x1
Adjustment of the limit positions
press for at least 2 seconds for a
continuous movement
or
Press „Stop“
for 1 second
Press „Stop“ and
„Down“ simultaneously
for 2 seconds
+
x2
Correct lower limit position
To get to the intermediate position
please press the "Stop" button for
2 seconds.
If the motor is using the step
function , after pressing the „Stop“
button for 2 seconds the hanging
will move (regardless of the current
position) to the lower limit position
first and then to the set
intermediate position.
The intermediate position can also be deleted using the same procedure (motor confirms 1x).