made for garden
41 / 82
PL
SK
DE
EN
CS
14 days.
DEVICE-SPECIFIC STORAGE INSTRUCTIONS
1. Store the machine in a dry, clean and frost-protected place, out of reach of unauthorized
persons.
2. Cover unit with a suitable protective cover that does not retain moisture. Do not use sheet
plastic as a dust cover. A nonporous cover will trap moisture around the machine, promoting
rust and corrosion.
3. Keep the machine in good condition, if necessary change warning and instruction labels on
the machine.
NOTE: When storing care should be taken to rust-proof the equipment. Using a light
oil or silicone, coat the equipment, especially all metal parts and all moving parts.
TRANSPORTING
Warning!!! When transporting the machine, turn the fuel valve (if equipped) to
the OFF position, and keep the machine level to prevent fuel spillage. Spilled fuel
or fuel vapor may ignite. To avoid severe burns or fire hazards, let the engine cool
before transporting the machine or storing it indoors.
1. Turn the engine switch and fuel valve (if equipped) to the off or stop position.
2. Let the engine cool before transporting.
3. Keep the machine level to prevent fuel spillage.
4. Take care not to drop or strike the machine when transporting.
5. Tie down the machine securely in an upright position while transporting.
PROBLEMS SHOOTING
Problems which you meet while working with the machine have mostly very simple reason which
you can put easy in order by yourself. If your are in doubts or if the repair is more complicated,
or it is a failure which is not described here, contact authorised service center. All repairs let do
in authorised service centers, which used original spare parts.
MALFUNCTIONS
POSSIBLE CAUSES
CORRECTIVE ACTIONS
Engine fails to start
Engine flooded
Repeated start attempts with choke Off
Water in fuel or old fuel
Drain tank and refill with fresh fuel
Lack of oil
Add oil
Engine starts hard or runs
poorly
Spark plug faulty
Replace the spark plug
Fuel cap ventilation is blocked
Clear the ventilation
Auger does not rotate
Foreign matter blocking
Clean
Shear pin broken
Replace the broken pin
Auger drive belt slipping
Adjust the belt and adjust control rope
Auger drive belt broken
Replace the belt
