01-03
3
34617 Rev D
NANOV TOP DV GAS APPLIANCE INSTALLATION INSTRUCTIONS
A. APPLIANCE SPECIFICATIONS
1. U.S. AND CANADA CERTIFICATION
The NANOV Series gas appliance has been tested in
accordance with the ANSI standard
Z21.88-2000
in
the United States, and the current
CSA 2.33-2000
in
Canada, and has been listed by Underwriters
Laboratories Inc. for installation as described in this
manual. All components are UL, AGA, CGA or CSA
safety certified.
2. LOCAL CODES
This installation must conform with local codes. In
the absence of local codes comply with the
National
Fuel Gas Code
,
ANSI Z223.1-latest edition
, in the U.S.A.
and the
CAN/CGA B149 Installation Codes
in Canada.
The NANOV Series gas appliance has been tested
and listed for use in manufactured housing (mobile
homes). These installation instructions conform with
the
Manufactured Home Construction and Safety
Standard
,
Title 24 CFR, Part 3280
,
or when such a
standard is not applicable, the standard for
Manufactured Home Installations
,
ANSI A225.1
.
For assistance during installation contact your local
dealer or contact the Heatilator Technical Services
Department, Hearth & Home Technologies, 1915 W.
Saunders Street, Mt. Pleasant, Iowa 52641,
1-800-843-2848.
HEATILATOR and NANOV are registered trademarks
Hearth & Home Technologies, Division HON
INDUSTRIES.
3. GLASS SPECIFICATIONS/CERTIFICATIONS
Heatilator gas appliances manufactured with
tempered glass may be installed in hazardous
locations such as bathtub enclosures as defined by
the CPSC. The tempered glass has been tested and
certified to the requirements of
ANSI Z97.1-1984
and
CPSC 16 CFR 1202
. (Safety Glazing Certification
Council
SGCC# 1595
and
1597
. Architectural Testing,
Inc. Reports
02-31919.01
and
02-31917.01
.)
This statement is in compliance with
SPCS 16 CFR
Section 1201.5
Certification and labeling
requirements which refers to
15 USC 2063
stating
Such certificate shall accompany the product or
shall otherwise be furnished to any distributor or
retailer to whom the product is delivered.
Some local building codes require the use of tempered
glass with permanent marking in such locations.
Glass meeting this requirement is available from the
factory. Please contact your dealer or distributor to
order.
Typical Horizontal Installation
Typical Vertical Installation
All manuals and user guides at all-guides.com
