34617 Rev D
22
01-03
NANOV TOP DV GAS APPLIANCE INSTALLATION INSTRUCTIONS
5. APPLIANCE PREPARATION
a. Log Set
Remove two shipping bands from the log set
(Figure 44) and reassemble. The log set should
look similar to that in Figure 45.
WARNING! RISK OF CARBON MONOXIDE!
Do not hit or strike glass. Do not operate this appliance
with the glass removed, broken, or not sealed.
c. Placing the Rock Wool
Place a small amount of 1/2 diameter pieces
(dime-size) of rock wool on the burner pan so
that the rock wool touches but
does not cover
the
holes in the burner pan. This will provide the
glowing embers look. See Figure 47.
Figure 46
Placing the Vermiculite and Lava Rock
(top logs removed for clarity)
Figure 47
Placing the Rock Wool
(top logs removed for clarity)
Figure 45 - Assembled Log Set
b. Placing the Lava Rock and Vermiculite
See Figure 46 for lava rock and vermiculite
placement.
6. GLASS AND SCREEN REPLACEMENT
See page 27 of this instruction manual.
7. CONTROL ACCESS PANEL
REPLACEMENT
Replace the control access panel as shown in
Figure 48.
Figure 48 - Replace Control Access Panel
Figure 44 - Log Set Banded for Shipping
All manuals and user guides at all-guides.com
