01-03
27
34617 Rev D
NANOV TOP DV GAS APPLIANCE INSTALLATION INSTRUCTIONS
Figure 51
Glass Cleaning
Safety Note
Handle glass with care to
avoid striking, scratching or
slamming shut. NEVER
clean glass when it is hot.
Keep children and pets a
safe distance away.
Figure 52 - Log Removal
3. VENTING SYSTEM INSPECTION
The appliance and venting system should be
inspected before use, and at least annually by a
qualified field service person to ensure that the flow
of combustion and ventilation air is not obstructed.
4. CLEANING THE GLASS
See Figure 51.
Never operate this appliance without the glass
properly secured in place or if the glass if broken or
chipped.
In the event of glass breakage, carefully remove the
glass frame. This will allow the removal of all glass
fragments and sheet metal edge protection strips.
Vacuum all remaining glass pieces with a shop vac.
DO NOT VACUUM IF PIECES ARE HOT
. Replace
glass with only a Heatilator brand glass panel
assembly ordered direct or through your local
distributor. Never use substitute material. Only fully
tempered soda lime safety glass or ceramic glass
may be used on this appliance.
5. LOG REMOVAL/REPLACEMENT
If removal of the logs becomes necessary, remove
the two screws at the front of the grate. Grasp the two
outside upright grate bars. Pull the log/grate assem-
bly toward the front and up, off the burner. See
Figure 52.
To replace the logs, grasp the two outside upright
grate bars. Push and lower the log set onto the
burner pan, making sure the back of the left most
grate bar slides through the grate mounting bracket
attached to the hearth pan. Attach two screws at the
front of the grate.
All manuals and user guides at all-guides.com
