Heatilator • HEIR36, HEIR42, HEIR50 Installation Manual • 2285-980 Rev. G • 12/14
54
Log #5 (2285-705)
: Locate notched area on Log #1 that will be used to position Log #5. See Figure 2. Place Log #5 into
appliance with “burned” edge toward center of appliance. See Figure 11. Log will sit on bottom refractory and should be
about 1-1/2 inches from right grate tine. The center of the log should rest in notch on Log #3 and the top of Log #5 should
rest in the notch on Log #1.
Log #4 (2285-704)
: See Figure 8. Place Log #4 in appliance with burned edge facing center. The bottom of log #4 will rest
against left side refractory and on bottom refractory. Slide bottom of Log #4 toward front of appliance until it contacts back
side of Log #2. Rest top of Log #4 in notch on top left corner of Log #1. See Figure 2 and Figure 9.
Log #3 (2285-703)
: Place log in appliance as shown in Figure 7. Log #3 should contact right and right center grate tines
and also be about 1/4 inch from right side refractory.
Figure 7.
Figure 8.
66
55
Figure 6.
22
11
44
33
BURNED EDGE
BURNED EDGE
44
11
33
Figure 9.
Figure 10.
Figure 11.
55
NOTCH FOR LOG #6
NOTCH FOR LOG #6
LOG CONTACTS
LOG CONTACTS
REFRACTORY
REFRACTORY
BURNED EDGE
BURNED EDGE
LOG CONTACTS SIDE
LOG CONTACTS SIDE
REFRACTORY
REFRACTORY
1-1/2 IN.
1-1/2 IN.
(APPROXIMATELY)
(APPROXIMATELY)
LOG CONTACTS
LOG CONTACTS
GRATE TINES
GRATE TINES
1/4 IN. FROM LOG
1/4 IN. FROM LOG
TO REFRACTORY
TO REFRACTORY
NOTCH FOR LOG #5
NOTCH FOR LOG #5
