12
Direct Spark Ignition (DSI) Fireplaces
Be sure to read and follow all safety information
found on page 9 and elsewhere in this
Owners
Guide
. And be sure to read and follow all safety and
lighting instructions found on the labels in the
controls compartment of your fireplace. A picture of
this is shown in Figure 1 .
The drawing below shows you the position of the
control valve. It also shows where to turn the
fireplace burner flame on and off.
During the heating
season:
Turn the fireplace ON/
OFF rocker switch to the
ON position. This causes
the ignitor to spark and
light the burner. Turn the
ON/OFF rocker switch to
the OFF position and the
burner will extinguish.
During the off season:
When the heating season
is over, turn the ON/OFF
switch to the OFF
position. The system will
be shut down.
To turn the burner
flame on or off:
Use the fireplace ON/OFF
rocker switch, wall switch,
or remote control kit.
Figure 7. The DSI Control Valve and On/Off
Rocker Switch
Lighting Your Direct Spark Ignition Fireplace
If you have read and understand all of the safety
instructions in this
Owners Guide
, youre ready to
light your direct spark ignition fireplace. If you have
read and
do not
understand them, contact your
dealer or qualified service technician before
attempting to light your fireplace. Be sure to follow
these lighting instructions exactly.
DSI CONTROL VALVE
ON/OFF
ROCKER
SWITCH