13
Challenge Level
The Challenge Level is set to a default
level of one (low) on a scale of one
to four (highest). Before a pulse is
calibrated, a short press on the top of the
Sensor Button will
cycle you through the
Challenge Levels.
We recommend that you leave the Challenge Level on the default
setting (low) for your first Stress Relief Session. When you can
consistently keep the Coherence Level Indicator glowing green,
you should then increase your Challenge Level.
Note:
If your emWave is turned off while in Basic Mode, the Challenge Level will default back to
Level 1. If your emWave is turned off while in Advanced Mode, your Challenge Level settings
will be retained.
emwave owners manual v1.2.1 .indd 13
11/7/07 12:40:25 PM