3.
OFF Mode
When the blender is plugged in but not in operation, the display reads “- - - -” to
indicate OFF mode. This is when the lid is on.
If the lid is not on, it will show “E2”.
4.
Standby mode
Press “Start/Cancel” to enter into Standby mode, display will show ”0 0 0 0”.
Press “Start/Cancel” during a blending/cooking process to cancel that function. The
display will show “0 0 0 0”.
5.
Menu
Press “Menu” repeatedly to choose between the 12 programs.
When your chosen programs indicator is illuminated, press “Start/Cancel” to start the
program.
6.
Delay Start
“Delay Start” function is only available for programs with heating involved.
Not working on cold blending programs.
A delay start timer can be set, at the end of the delay start countdown, the blender
will begin operation.
Put the blender into standby mode, by pressing “Start/Cancel”.
The display will show “0 0 0 0”.
Press the Delay Start button repeatedly to set the countdown timer.
Every press of the Delay Start button will add 10 min, or long press it until the
countdown timer you require is shown on the screen.
Press Menu repeatedly to select a program,
Press “Start/Cancel”.
Timer will start to countdown.
Maximum countdown time which can be set is 12 Hours. Minimum is 10 minutes.
7.
Pulse blending
Put the blender into standby mode, by pressing “Start/Cancel”.
The display will show “0 0 0 0”.
Press and hold “Pulse blending”, the blender will start up with a beep sound.
Timer starts to count down, from 00:60 down to zero.
Keep holding down on the “Pulse blending” button while it operates.
When the button is released, the pulse function will stop, and the display will show
“0 0 0 0”.
The “Pulse blending” button can be pressed and held again to repeat the function.
Note:
If no button is pressed within 30 seconds, the unit will beep, and the display will show
“- - - -” to indicate OFF mode. The “Start/Cancel” button will need to be pressed to put
the blender into standby mode again.
