Special Cord Set Instructions:
Per safety requirement, a short power supply cord (0.75 m to 0.9 m) is provided to
reduce the hazards resulting from grabbing, entanglement and tripping.
This appliance has a 3-prong grounding plug. To reduce the risk of electric shock, plug
the power cord into a grounded (earthed) electrical outlet that is easily accessible.
Initial Setup:
• Read all the Important Safeguards before using the appliance. Failure to read and
follow the Important Safeguards may result in damage to the appliance, property
damage or personal injury.
• Remove all packaging material from in and around the blender.
• Do not remove any safety stickers from the blender base, pitcher or lid.
• Do not remove rating label from bottom of blender base.
• Place the blender on a stable, level surface. Do not block the air vents at the
bottom of the blender base.
Cleaning Before First Use:
Before using the blender for the first time, follow the steps below to clean the pitcher
1. Connect the power cord to a 220-240 V power source.
Then connect the power cord to the input socket on the base of the unit.
Note: The display will show “E2” until the pitcher is seated on the blender base and
the lid is fully secured.
2. Remove the lid and fill the pitcher with water to 1250 ml, as indicated on the pitcher.
3. Place the lid on the pitcher firmly, then turn the lid clockwise until it clicks into place.
4. Place the pitcher on the blender base by aligning the position indicator near the
bottom of the pitcher to the position indicator near the top of the blender base.
5. Press the Menu to select the cleaning function.
6. Press Start/Pause to begin.
7. When the program completes, the display indicates End.
8. Lift the pitcher up and off the blender base.
9. Ensuring the bottom of the pitcher remains dry, rinse the pitcher, lid and lid cap with
warm, clear water.
You are ready to start using your blender.
