Computer Control Wire
Upright Control Wire
computer grounding wire
Frame grounding wire
1.
Put the Computer Console (A) on the upper part of the Uprights(C,D) on the assembled Frame(B),
and connect the uprights control wire with computer control wires. Last, tighten the computer console
with Hex Screw(b) on the upper part of uprights.
2. After confirming
the
assembly is
finished, operate the treadmill accoding to the operation
instructions.
Note: 1. When tigthening the
screws
, pay attention to whether it
pinches the inner
tube control wire.
21
2009/10/26 Ver1.0+V2.0
