11
“
O
PERATION
I
NSTRUCTIONS
”
H
OW TO ADJUST THE ADJUSTING ENDCAPS OF THE REAR STABILIZER
a. After placing the equipment in the intended location for use, check the
stability of the equipment
b. If it’s the one of the
Adjusting EndCaps (21)
on rear end of the
Rear
Stabilizer (3)
causes a slight rocking motion. To level the equipment,
turn one or both of the
Adjusting EndCaps (21)
in clockwise or
counter-clockwise direction until the equipment sets on the floor without
rocking
H
OW TO ADJUST CONSOLE ANGLE
To get the best console angle, it’s suggested to use both hands to hold the upper and lower
end of the console and gently adjust the console angle to the proper position
H
OW TO ADJUST SEAT POST HIEGHT
a. Pull
the
Adjusting Handle (25)
up to adjust the seat height
b. Once adjusting the seat to the proper position, release the
Adjusting Handle (25)
until hearing the “click” sound
H
OW TO TWO THE ITEM SAFELY
Hold the
Rear Stabilizer (3)
up with two hands and tow the item to the
desired place carefully
Make sure the floor is level while towing the item
Summary of Contents for HM-U6200
Page 42: ...42 PRODUCT PARTS DRAWING...
