Health Master HM-U6200, Owner'S Manual

Page: 7 / 44

7
“ A
SSEMBLE
I
NSTRUCTIONS ”
S
TEP 2
–
Upright Post Assembly
a. Slide the Upright Sleeve (26) onto the Upright Post
Assembly (5) Be care not to pinch the wires
b. Attach the Upright Post Assembly (5) to the Main
Frame (1) with four Washers (8x16x2.0t)(66) , four
Lock Washers (M8)(65) , four Bolts, Socket Head
(M8xp1.25x16mm)(82)
c. Fully secure four Washers (8x16x2.0t)(66) ,
four Lock Washers (M8)(65) , and four Bolts,
Socket Head (M8xp1.25x16mm)(82) that
attach to the Upright Post Assembly (5) and
the Main Frame (1).
d. Connect the Rear Connection Wire (95A) to the
Motor Wire (98). Be care not to pinch the wires.
e. Connect the Rear Connection Wire (95B) to the
Adaptor Connection Wire (96). Be care not to
pinch the wires
f. Connect the Rear Connection Wire (95C) to the
Sensor Wire (99). Be care not to pinch the wires
g. Slide the Upright Sleeve (26) down until it meets the
Main Frame (1).
S
TEP 3
–
Front Handlebar Assembly
a. Remove four Washers (8x16x2.0t)(66) , four Lock Washers (M8)(65) and four Bolts, Button Head
(M8xp1.25x16mm)(79) from the side of the Front Handlebar (6)
b. Position the Front Handlebar (6) in place through the Upright Post Assembly (5) and secure with five Washers
(8x16x2.0t)(66) , five Lock Washers (M8)(65) , four Bolts, Button Head (M8xp1.25x16mm)(79) and one Bolt, Socket
Head (M8xp1.25x45mm)(83) NOTE: One Washer (8x16x2.0t)(66) , one Lock Washer (M8)(65) , one Bolt, Socket
Head (M8xp1.25x45mm)(83) will be packed into the hardware bag
c. Fully secure five Washers (8x16x2.0t)(66) , five Lock Washers (M8)(65) , four Bolts, Button Head
(M8xp1.25x16mm)(79) and one Bolt, Socket Head (M8xp1.25x45mm)(83) that attach to the Front Handlebar(6) and
the Main Frame (1).
NOTE: “Small Tip: Attach screws and bolts to the
assembly parts first before secure ” **Please do not
secure the bolts unless you make sure 4pcs
Washers, Lock Washers and Bolts all go into screw
holes of Upright Post Assembly and Main Frame**
NOTE: “Small Tip: Attach screws and bolts to the assembly parts first before secure ”
**Please do not secure the bolts unless you make sure Bolts all go into screw holes of Front Handlebar and
Upright Post Assembly**
NOTE: After connecting the wires, slightly and gently pull
two sides of wires to test and make sure whether the wires
are fully connected.