Health Master HM-U6200, Owner'S Manual

Page: 30 / 44

30
“ C
ONSOLE
I
NSTRUCTIONS –
H
.
R
.
C
.
P
ROGRAM (P9 ~ P12) ”
“ B. SET THE DESIRED TIME or DESIRED DISTANCE
To avoid the user to select TIME and DISTANCE in the same program to confuse the user couldn’t distinguish
which one (TIME or DISTANCE) as the first priority. User could only select TIME or DISTANCE in the same
program, one at the time
If you would like to select TIME value, not DISTANCE
value:
UP or DOWN
button:
a. After pressing the
ENTER
button to enter into
H.R.C.
PROGRAM (P9 ~ P12)
, the TIME function mode
will appear with the display flashing “0:00”
b. Use
UP or DOWN
buttons to set the desired TIME
(1:00 TO 99:00; 1 MINUTE INCREMENT)
NOTE for TIME:
z
Count Up: If a target time was not selected, TIME will
count up from 0:00 to maximum 99:59 minutes
z
Count Down: If you have set the target time, the
console will count down from that selected target time
down to 0:00
If you would like to select DISTANCE value, not TIME
value:
ENTER
button and then
UP or DOWN
button:
a. After pressing the
ENTER
button to enter into
H.R.C. PROGRAM (P9 ~ 12)
, the TIME function
mode will appear with the display flashing “0:00”.
b. Press the
ENTER
button again, the DISTANCE
function mode will then appear with the display flashing
“0.0”
c. Use
UP or DOWN
buttons to set the desired
DISTANCE (1 TO 999KM/MILE; 1 KM/MILE
INCREMENT)
NOTE for DISTANCE:
z
Count Up: If a target distance was not selected, this
would measure the total distance from 0:00 to 999
km/mile
z
Count Down: If you have set the target distance, the
console will count down from the selected target time
down to 0
“ C. SET THE DESIRED CALORIES ”
ENTER
button and then
UP or DOWN
button:
a. Press
ENTER
button to confirm the TIME or DISTANCE value and enter the mode to set the
CALORIES
b. Use
UP or DOWN
buttons to set the desired CALORIES (10 TO 9990KCAL; 10 KCAL
INCREMENT)
NOTE for CALORIES:
z
Count Up: If target calories was not selected, this would measure total calories burned during exercise
z
Count Down: If you have set the preference value of calories, the console will count down from that selected value
down to 0