Headux TitanMig Pulse 2700, Operation Manual, Page: 46 / 72

TitanMig Pulse 2700/3500/5000 Operators Manual
Issue. A 0516 42
3.2 MMAW (Stick/MMA) Welding
Insert the cable plug with electrode holder into the
“+” socket on the front panel of the welding
machine, and tighten it clockwise.
Insert the cable plug of the work return lead into
the “-” socket on the front panel of the welding
machine, and tighten it clockwise

After connecting the welding leads as detailed you will need to switch the power switch on the
back panel to “ON”

Select MMA by switching to the MMA welding mode. There is voltage output at both output
terminals.

Set the amperage on the machine suitable for the electrode being used. Ensure you check that
you have the electrode polarity correct.
Please see below a guide to amperages required.
Electrode Diameter(mm) Welding Current(A) Electrode Diameter(mm) Welding Current(A)
2.0 40-60 4.0 130-180
2.5 60-95 5.0 180-220
3.2 95-130 6.0 220-260
Average Thickness of
Material (mm)
Suggested Electrode
Diameter (mm)
Average Thickness of
Material (mm)
Suggested Electrode
Diameter (mm)
1.0-2.0 2.5 5.0-8.0 4.0
2.0-5.0 3.2 8.0 > 5.0