Headux TitanMig Pulse 2700, Operation Manual, Page: 3 / 72

TitanMig Pulse 2700/3500/5000 Operators Manual
Issue. A 0516
Welcome:
Thank you for your purchase of your new Weldtronic product. The Weldtronic product range provides
you with quality and reliability.
This product is supported by our extensive service network. In the unlikely event of a problem occurring
please call your local distributor.
Please record below the details from your product as these will be required for warranty purposes and to
ensure you get the correct information should you require assistance or spare parts.
Date purchased: ________________________________________________________________________
From where: ___________________________________________________________________________
Serial No: ____________________________________________________________________________
(The serial number will be located on the equipment data plate underneath or on the rear panel)
This Operating manual has been designed to instruct you on the correct use and operation of your
Weldtronic product. Information is a guide and we assume no liability for its use.
Please take the time to read the entire manual paying particular attention to the Safety Precautions. They
will help you to avoid potential hazards that may exist when working with this product.
2 Year Warranty Statement.

This product is covered by a 2 Year Warranty Parts & Labour Warranty.

This warranty does not cover freight or goods that have been interfered with.

All goods in question must be repaired by an authorized repair agent as appointed by Weldtronic.

Warranty does not cover abuse, misuse, accident, theft or general wear & tear.

New product will not be supplied unless Weldtronic International P/L has inspected product
returned for warranty and agrees to replace the product.

Product will only be replaced if repair is not possible.

Warranty will be considered void if the 15 Amp primary power Input Plug is modified or replaced
to fit a domestic 10A primary power input Plug.

Warranty will be considered void if the equipment is powered from an unsuitable engine driven
generator.

Warranty will be considered void if no proof of purchase can be provided.

Warranty will be considered void if this product has been altered, tampered or used in any
manner contrary to customary usage or application.

Full warranty details and conditions supplied with this product are shown in the back of this
manual.